Electromagnetic Compatibility; Classification Of Emc Categories; A.1 Electromagnetic Compatibility - Siemens SINAMICS G110D Operating Instructions Manual

Appendix A
A.1

Electromagnetic compatibility

A.1.1 Electromagnetic compatibility
Electromagnetic compatibility
All manufacturers/assemblers of electrical apparatus which "performs a complete intrinsic
function and is placed on the market as a single unit intended for the end user" must comply
with the EMC directive EC/89/336.
There are three routes for the manufacturer/assembler to demonstrate compliance:
Self-certification
This is a manufacturer's declaration that the European standards applicable to the electrical
environment for which the apparatus is intended have been met. Only standards that have
been officially published in the Official Journal of the European Community can be cited in
the manufacturer's declaration.
Technical construction file
A technical construction file can be prepared for the apparatus describing its EMC
characteristics. This file must be approved by a 'Competent Body' appointed by the
appropriate European government organization. This approach allows the use of standards
that are still in preparation.
EMC Standards
The SINAMICS G110D Inverters have been tested in accordance with the EMC Product
Standard EN 61800-3:2004.
A.1.2

Classification of EMC categories

Classification of EMC performance
The EMC environment and categories are defined within the EMC Product Standard
EN 61800-3, as follows:
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
A
179