Siemens SINAMICS G110D Operating Instructions Manual page 11

Transport and storage
Correct transport, storage as well as careful operation and maintenance are essential for
the proper and safe operation of the equipment.
Protect the equipment against physical shocks and vibration during transport and storage. It
is important that the equipment is protected from water (rainfall) and excessive
temperatures.
Commissioning
Working on the equipment by unqualified personnel or failure to comply with warnings can
result in severe personal injury or serious damage to material. Only suitably qualified
personnel trained in the setup, installation, commissioning and operation of the product
should carry out work on the equipment.
Cable connection
The control cables must be laid separately from the power cables. Carry out the
connections as shown in the installation section in this manual, to prevent inductive and
capacitive interference from affecting the correct function of the system.
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
WARNING
CAUTION
WARNING
CAUTION
Warnings and cautions
1.1 Warning and Cautions
11