Siemens SINAMICS G110D Operating Instructions Manual page 146

Functions
6.11 Operation in fieldbus systems
Table 6- 53 AS-i slave identities
Slave IO code
1 7
2 7
The structure and flow of data is given in the diagram below.
PXXX PXXX
Figure 6-32 Internal data flow of AS-i information within the Inverter
Addressing
The Inverter use a standard M12 connector for connection to the AS-i bus. Since the
connection between the inverter and bus is a spur, the Inverter can be disconnected from the
bus, the addresses reassigned, and the inverter reconnected without interrupting
communications elsewhere on the bus.
146
ID code ID2 code
A 5
A E
Description
Combi field device
Free profile A/B slave
Operating Instructions, 2009-05-15, A5E02385577A AB
SINAMICS G110D