Using The Drum Track Function In Combination Mode - Korg KROSS Operation Manual

Drum Track function
Using the Drum Track function in
Combination mode
Selecting a combination and turning the
Drum Track function on/off
1. Press the COMBI button to enter Combination mode,
and select the desired combination. (see "Selecting
Combinations" on page 45)
2. Press the DRUM TRACK button to turn the Drum
Track on/off. For details, please see the Program
mode sections "Playing and stopping the Drum
Track", and "Changing the tempo".
Selecting a Drum Track pattern and Drum
Track program
Unlike its functionality in Program mode, the Drum Track
function in Combination mode does not have its own
dedicated track (timbre). The program that plays the Drum
Track pattern will use the timbre that you specify.
1. In the COMBI> PROG page, select the timbre that
you want to use for the drum track, and then select
the Drum Track program.
In the following illustration, we've selected timbre 5 for
use by the drum track.
2. In the C-TIMBRE>MIDI page, specify the MIDI
channel of the timbre used by the drum track.
Be aware that if another timbre uses the same MIDI
channel, that timbre will also be played.
3. In the C-DRUM TRACK>CHANNEL page, use
Output to specify the output MIDI channel for the
drum track.
Specify the drum track's MIDI channel Output. Set this
to match the MIDI Channel of the timbre that you
specified in step 2.
4. Access the C-DRUM TRACK> PATTERN page.
Use Pattern No. to select the Drum Track pattern.
Note: 000: If you select Off, it will not be possible to turn
the DRUM TRACK button on.
84
5. Press the DRUM TRACK button to verify that the
pattern plays correctly.
The method of triggering will depend on the Trigger
settings.