Media Utility; Formatting Sd Card; Setting The Current Time - Korg KROSS Operation Manual

Overall settings for the KROSS, and saving/loading data

Media utility

Formatting SD card

Newly purchased media or media that has been used by
another device cannot be used "as is;" you must format the
SD card before you can use it with the KROSS.
When you format the SD card, all data that had been
saved on that media will be erased. Be sure to double-
check the SD card for data before you format.
You must use the KROSS to format the media. The
KROSS will not correctly recognize media that has
been formatted by another device.
1. Correctly insert the SD card to be formatted into the
SD card slot. (see "Inserting/removing an SD card" on
page 25)
2. Access the MEDIA> UTIL page.
Hold down the EXIT button (
SEQ button (
buttons to access the MEDIA> UTIL page.
3. Select the Format function.
Press the FUNCTION button. Use the PAGE+ (▼)
button to select Format, and then press the MENU (OK)
button. A dialog box will appear.
4. Press the MENU (OK) button to format, or press the
FUNCTION (CANCEL) button if you decide to
cancel.
When you press the MENU (OK) button, a message will
ask you for confirmation. Press the MENU (OK) button
once again to execute the Format operation.
Never remove an SD card from the slot while
formatting is in progress.

Setting the current time

Specify the date and time; this is used to record the correct
date and time when you save data.
Since the KROSS does not contain a calendar or clock,
you should use the Set Date/Time function to specify
the date and time before saving, if necessary.
1. Select the MEDIA> UTIL page Set Date/Time
function. (see steps 2 and 3 of "Formatting SD card")
A dialog box will appear.
2. Use the VALUE dial to set the correct year, month,
day, hour, minute, and second.
128
) and press the
). Use the PAGE+ and PAGE-
3. Press the MENU (OK) button.