Insert Effects - Korg KROSS Operation Manual

Insert effects

1. Access the P-FX ROUTING> IFX page.
Effect On/Off Effect
2. In the Effect area, select each insert effect that you
want to use.
You can press the ENTER button and choose from a list.
Tip: You can use the "Copy Insert Effect" function to
copy the effect settings from another effect. The "Swap
Insert Effect" function lets you exchange (for example)
insert effects 1 and 5.
3. In the Effect On/Off area, turn the insert effect on.
Each time you press the ENTER button, the insert effect
will turn on or off. If this is Off, the result will be the
same as if 000: No Effect is selected; the input sound will
be output without change.
4. Specify the chain setting.
If the Chain check box is selected, the insert effect will
be chained in series. Set the Chain To parameter to
"→2."
If →2 is selected, the insert effects will be connected in
series in the order of IFX1 → IFX2.
5. Access the P-FX ROUTING> MIXER page.
Pan:#8 Bus
6. Set the "Pan:#8," "Bus (Bus Select)," "FX Control
Bus," "Send1," and "Send2" parameters to specify the
pan and routing of the signal following the insert
effect.
If Chain is On, the settings that follow the last insert
effect will be used. (FX Control Bus is an exception.)
Pan: #8: Specifies the pan.
Bus (Bus Select): Specifies the output destination.
Normally you'll set this to L/R.
Send1, Send2: Specify the send levels to the master
effects. For this example, set them to 127.
FX Control Bus: The sound that has passed through the
insert effect is then sent to the FX control bus. This
allows you to use a different sound to control the input to
an effect. You can use two FX control buses, giving you a
wide range of possibilities for controlling the effects. (see
"FX Control Bus" on page 209 of the Parameter Guide)
Chain Chain To
Send1 Send2 FX Control Bus
Routing and effect settings Effect settings for a program
7. In the P-FX ROUTING> IFX page, edit the
parameters of the insert effect you selected.
Edit the parameters in the P-IFX> IFX 1–5 pages.
Effect On/Off Effect Parameters
Wet/Dry
Effect On/Off: Turns the insert effect on/off. This is
linked with the on/off setting of the P-FX ROUTING>
IFX page.
For details on the parameters of each effect, please see
page 217 and following of the Parameter Guide.
Double-size effects
Double-size effects (D00: St.Mltband Limiter–D13: Early
Reflections) use twice as much processing area as other
effects.
D00: St.Mltband Limiter–D10: Rotary SpeakerOD can be
used with insert effect 1, D00: St.Mltband Limiter–D09:
Vocoder can be used with insert effects 2–4, and D00:
St.Mltband Limiter–D13: Early Reflections can be used with
master effect 1.
When you use a double-size effect, the next-numbered effect
will be unavailable. For example if you've selected a double-
size effect for IFX1, you won't be able to use IFX2.
Example of when a double-size effect is selected for IFX1
Master effects
1. "Send1" and "Send2" settings (P-FX ROUTING>
SEND page or P-FX ROUTUNG> MIXER page)
determine the input level to the master effects. If
"Send1" and "Send2" are set to 0, nothing will be
input to the master effects. "Send1" corresponds to
MFX1, and "Send2" corresponds to MFX2.
2. Access the P-MFX> SETUP page.
69