Korg KROSS Operation Manual page 133

4. Choose the Load selected function.
Press the FUNCTION button. Use the PAGE– (▲) button
to choose Load selected, and then press the MENU (OK)
button. A dialog box will appear.
5. Press the MENU (OK) button. All data from the .PCG
file will be loaded into the KROSS.
Never remove the media while data is being loaded.
Loading individual data from a .PCG file
The KROSS lets you load Programs, Combinations, Drum
kits, User Arpeggio patterns individually or by individual
banks.
Be aware that if you change the order of Programs, the
sounds played by Combinations may also be affected.
As an example here, we will explain how a combination
(A012) saved in bank A can be loaded into UA000.
1. Select the combination that you want to load.
Use the cursor buttons ▲▼ to select a file, and press the
cursor button ► to move to the next level.
[PCG] .PCG→[Cmb] Combinations→[Cmb] Bank
A→[Cmb] 012
2. Choose the Load selected function.
Press the FUNCTION button. Use the PAGE– (▲) button
to choose Load selected, and then press the MENU (OK)
button. A dialog box will appear.
3. Specify the load-source combination in the From
section; and specify the load-destination combination
(UA000) in the To section.
Note: The load-destination will be user bank.
4. Press the MENU (OK) button to execute loading; the
loaded combination will be assigned to UA000.
Loading data Loading data from SD card
Loading songs for use in Sequencer mode
(.SNG)
As an example here, we will explain how to load a song.
Tip: If you want to use edited programs, drum kits, or user
arpeggio patterns in a song, load those programs (i.e., .PCG
file) after (or before) you load the song.
1. Perform steps 1–3 under "Loading all Programs,
Combinations, Drum Kits and Arpeggio patterns" on
page 126. Select the .SNG file containing the data you
want to load (it will be highlighted).
2. Choose the Load selected function.
Press the FUNCTION button. Use the PAGE– (▲) button
to choose Load selected, and then press the MENU (OK)
button. A dialog box will appear.
3. Use "Select .SNG Allocation" to specify the
destination where the song data will be loaded.
"Append" will load the song into the song number that
follows the song(s) that currently exists in internal
memory, without leaving a vacant number.
"Clear" will erase all songs from internal memory, and
load the songs into the numbers from which they were
saved.
4. Press the MENU(OK) button to execute loading.
Never remove the media while data is being loaded.
127