Arpeggio Pattern Selection And Operation Settings - Korg KROSS Operation Manual

Arpeggiator function
Arpeggiator control: [GATE], [VEL], [SWING]
Operation settings
Arpeggio Pattern Select
Changing the length of the arpeggiated notes
• By selecting the arpeggiator control [GATE] and
adjusting the value, you can change the duration of the
arpeggiated notes.
Negative "–" values make the notes shorter, and positive
"+" values lengthen them. If this is 00, the note length
will be as specified by the program parameter Gate (P-
ARP> SETUP page).
Note: It is effective to adjust the Release on the PROG>
TONE page.
Note: You can also change the duration of the arpeggiated
notes by adjusting ARP-GATE (the KNOB 2 knob) in the
TEMPO row of REALTIME CONTROLS. (Please see
page 305 of the Parameter Guide)
Changing the strength of the arpeggiated notes
• By selecting the arpeggiator control [VEL] (Velocity)
and adjusting the value, you can change the strength of
the arpeggiated notes.
Negative "–" values make the notes weaker, and positive
"+" values strengthen them. If this is 00, the strength of
the notes will be as specified by the program parameter
Velocity (P-ARP> SETUP page).
Note: It is effective to adjust Cutoff, Resonance, and EG
Intensity in the PROG> TONE page.
Giving a shuffle feel to the arpeggio pattern
• By selecting the arpeggiator control [SWING] and
adjusting the value, you can shift the timing of the even-
numbered arpeggiated notes forward or backward.
Negative "–" settings will make the even-numbered notes
earlier; positive "+" settings will make them later. If this
is at the center position (12 o'clock), the setting will be as
specified by the program parameter Swing (P-ARP>
SETUP page).
Note: Swing has no effect on the preset patterns.
Arpeggio pattern selection and
operation settings
In the PROG> ARP page you can select an arpeggio pattern
and specify how the arpeggiator will function.
1. Access the PROG> ARP page.
2. Use the cursor buttons ◄►▲▼ to select the
following parameters to edit.
3. Use the VALUE dial etc. to edit the value. Press the
ENTER button to switch the setting of the check box.
Selecting an arpeggio pattern
• In the Arpeggio Pattern Select area, select an arpeggio
pattern.
74
Preset: UP–Preset: Choose an arpeggio pattern from
RANDOM or 0000–1023.
With the factory settings, a variety of arpeggio patterns
are provided in the range 0000–1023.
Preset: UP
UP
Preset: DOWN
DOWN
Preset: ALT1
ALT1
Preset: ALT2
ALT2
Preset: RANDOM
RANDOM
Playing arpeggios across multiple octaves
• Use the Octave setting to specify the range of 1–4
octaves in which the arpeggio will be generated.
Octave: 4
UP