Korg KROSS Operation Manual page 14

Introduction to the KROSS
h: Check box
By selecting a check box parameter and pressing the ENTER
button or turning the VALUE dial, you can select or clear the
check box.
You can enable or disable a parameter or function by selecting or
clearing the check box. The parameter or function is enabled if
the check box is selected, and disabled if it is cleared.
h: Check box
i: Category select icon
For parameters indicated by this icon, you can use the
CATEGORY dial or the VALUE dial to select the category or
number.
j: Scroll
Use this to see parameter values that cannot be shown in a single
screen. Additional parameters exist in the direction of the black
indicator.
j: Scroll
k: Function list
The function list will appear when you press the FUNCTION
button. The functions that are shown will depend on the page
that's selected.
The functions shown on the bottom of the dialog box are assigned
to the four buttons. (see page 3)
k: Function list
l: Function dialog box
When you select a function, you'll see a dialog box where you
can adjust the settings that are needed to execute the command.
The dialog box that appears will depend on the command that you
selected. Some commands such as Solo Setting do not display a
dialog box.
l: Function dialog box
FUNCTION (CANCEL) button
8
Text edit icon
MENU (OK) button
* Text edit
When you select a parameter indicated by this icon and press the
ENTER button, a text edit window will appear.
In this screen you can rename text (such as the name of a
program, combination, or song). (see "Editing names" on
page 124)
* MENU (OK) button, FUNCTION (CANCEL) button
To execute a function, press the OK button. To cancel without
executing, press the CANCEL button.
* DONE button, COPY button, INSERT button
There are also buttons such as DONE, COPY, and INSERT which
perform an action when pressed, like the OK button and
CANCEL button explained in "* Function dialog box."