Audio Recorder; Midi; Damper Pedal; Media - Korg KROSS Operation Manual

Appendices

Audio recorder

Can't record
□ Is the SD card inserted correctly? → p.25
□ Could LOOP be turned on? You can't record if LOOP is
on.
The volume of imported data is too loud compared to the
sound played by the KROSS or the external audio input
□ If the data is very loud, there may be a substantial volume
difference. To temporarily adjust the playback volume of
the audio recorder, use the Set Play Level function. If you
want to overdub onto the imported audio, use the Adjust
Audio Level function (instead of Set Play Level) to lower
the volume of the entire audio song beforehand. → p.106
When you overdub, the previous take becomes too quiet
□ Could Set Play Level be set to something other than
0 dB? Use the Adjust Audio Level function to adjust the
volume of the entire audio song. → p.106
□ Could Master Volume be assigned to Foot Pedal, and
could that pedal be lowered? If you want to adjust the
volume of the performance while you record, use
Expression or Volume. → p.24

MIDI

The KROSS does not respond to incoming MIDI data
□ Are all MIDI cables or USB cables connected correctly?
→ p.26
□ Are the KROSS's receive settings (such as the global
MIDI channel and the timbre/track's receive channel) set
to match the channels of the transmitting device?
→ PG p.313
The KROSS does not respond correctly to incoming MIDI
data
□ Are the G-MIDI> FILTER settings MIDI Filter Enable
Program Change, Enable Bank Change, Enable
Control Change, Enable AfterTouch, and Enable
Exclusive each checked? → PG p.163
□ Does the KROSS support the types of messages that are
being sent to it? → PG p.313
Can't recall programs of the desired bank
□ Is the Bank Map setting correct? → PG p.158

Damper pedal

Damper response is wrong
□ Execute the Half Damper Calibration function
(GLOBAL> BASIC) to correctly calibrate the half-
damper pedal sensitivity. → PG p.177

Media

Can't format the SD card
□ Does the SD card meet the requirements for use on the
KROSS? → p.25
134
□ Is the SD card inserted correctly? → p.25
□ Could the SD card's Lock (write protect) switch be on?
Can't save/load data on the SD card
□ Is the SD card inserted correctly? → p.25
□ Has the SD card been formatted? → p.128
□ Could the SD card's Lock (write protect) switch be on?
SD card is not recognized
□ The date of the saved file is incorrect.
• Remove the SD card and check whether the card's
contacts are dirty. If they are dirty, clean them gently
with a dry cloth or a cotton swab.
* Do not use liquids. Take care not to touch the contacts
directly with your hands or with a metal object.
The date of the data is wrong
□ The files you saved have the incorrect date.
• The KROSS does not contain an internal calendar. Use
the Set Date/Time function (MEDIA> UTIL page) to
specify the current time and date before you save the
data. → p.128
Data that you saved from your computer to an SD card
does not appear in MEDIA mode.
• Copy the data to the KORG/KROSS2/DATA folder.
This folder will be created when you use the KROSS to
format the card. → p.119
• Is the file name extension format appropriate? → p.119

Connections with a computer

The KROSS does not respond to MIDI data sent from
outside
□ Is the USB cable connected correctly? → p.26
The computer does not detect the KROSS
□ Are the USB cables connected correctly?
An error occurs when you disconnect from the computer
□ Never disconnect the KROSS from the computer while
your host application is in use.
While connected, you are asked to install software or a
device driver
□ Does the operating system or version of your computer
support the KROSS?
When using USB, sound processing is slow, or the tempo is
unstable
□ Is the KORG USB-MIDI driver installed correctly?
• You must install the dedicated Korg driver in order to
use the KROSS via USB MIDI.
If your computer's operating system is Windows, you'll
need to install the driver for each USB port where you
connect the KROSS.
If you connect the KROSS to a different USB port than
the one you used when installing the KORG USB-MIDI
Driver for Windows, you'll need to reinstall the KORG
USB MIDI driver.
Your computer does not recognize an SD card that was
formatted by the KROSS
• Does the SD card reader support SDHC cards?