Editing A Combination; Summary Of The Edit Pages - Korg KROSS Operation Manual

Editing a combination

You can edit any of the Combinations that were shipped with
the KROSS. You can create your own combinations by
editing a preloaded combination, or by starting from an
initialized combination.
A combination has sixteen timbres; you can assign a
program to each timbre and specify its volume and pan, the
key range where the program will sound, and how its sound
will be routed to the effects. You can create simple setups
such as detuned sounds, split, or layers, or highly complex
orchestra-like setups.
Note: If a program you edit in Combination mode is used in
Program mode, that program will sound according to its
edited state.

Summary of the edit pages

To perform detailed editing, you'll need to access an edit
page in the display.
For details on how to access each mode and page, please see
"Basic operations" on page 12.
Page Tabs
MAIN Select and play a combination
Select a program for each timbre and
PROG
set its status
COMBI
MIXER Timbre volume, pan, and mute settings
ARP Arpeggiator easy editing
AUDIO IN External audio input settings
C-INPUT/
SW1 and 2 function settings and
CTRL
CONTROLLERS
tempo setting
TONE ADJUST Tone Adjust settings for each timbre
C-TONE
ADJ
EG ADJUST EG (ADSR) settings for each timbre
MIDI MIDI channel settings for each timbre
OSC OSC settings for each timbre
C-TIMBRE
PITCH Pitch settings for each timbre
SCALE Scale selection
KEY ZONE Key zone settings for each timbre
C-ZONE/
VEL ZONE Velocity zone settings for each timbre
DELAY
DELAY Delay time settings for each timbre
The structure of a combination, and the related pages
Timbre1
Parameters
Program
Timbre2 Parameters
Program
Timbre3
Parameters
Program
Timbre4
Parameters
Program
Timbre16
Parameters
Program
Main content
Controllers
Routing:
Step Sequencer
Master
Timbre
Effects
1, 2
Insert Effects
Insert
Master Effects
Effects
1...5
FX Control Bus
Editing a combination Summary of the edit pages
Page Tabs
1
2
C-FILTER
3
4
ASSIGN
A
C-ARP
B
SCAN ZONE
PATTERN
C-DRUM
TRACK
CHANNEL
BASIC
EDIT
C-STEP
SEQ
INST
MOD
BUS
SEND
C-FX
ROUTING
IFX
MIXER
IFX1
IFX2
C-IFX IFX3
IFX4
IFX5
SETUP
C-MFX
MFX1
MFX2
DrumTrack Tone Adjust
Arpeggiator
OUTPUT
L/MONO, R
Main content
MIDI transmit/receive filter settings for
each timbre
Arpeggiator assignments to each
timbre
Arpeggiator A settings
Arpeggiator B settings
Specifies the range in which the
arpeggiator operates
Drum Track pattern selection and
trigger region settings
Drum Track input/output MIDI channel
settings
Step sequencer program selection and
length settings
Step on/off entry
Instrument settings
Step sequencer settings such as accent
and swing
Bus assignments from each timbre to
the insert effects
Send amounts from each timbre to the
master effects
Insert effect type selection and chain
settings
Post-insert effect routing settings
Insert effect 1–5 settings
Master effect type selection and chain
settings
Master effect 1 and 2 settings
47