Download Print this page

Korg TRITON taktile Parameter Manual: Parameters Related To The Track Pad Mode; Scene Parameters; Parameters Related To The Entire Scene; Parameters Related To Controllers

Usb controller keyboard/synthesizer.
Hide thumbs

Advertisement

Parameters related to the Track pad mode

TRACK PAD ................................................................................................................
You can use the value slider as mouse buttons.
When you tap the left and right sides on the value slider, they will function as a left click and a right
click respectively.
TIP This parameter is only displayed when using the touch pad in Track pad mode.
Scene parameters
This section describes the parameters of the controllers. For information on the parameters that can be
set up for each controller, please see the Parameter List. (→ p.12
Parameters related to the entire scene
Target DAW ................ [Cubase, DP, GarageBand, Live, Logic, Pro Tools, SONAR,
CONTROL]
This mode optimizes the controller to the specified DAW software.
The behavior of sliders, knobs, and buttons will be mapped for the specified DAW software.
TIP When using the unit with GarageBand/Logic, please download the taktile/TRITON taktile Con-
trol Surface plug-in for GarageBand/Logic from the Korg website (http://www.korg.com/), and
set it up following the steps in the supplied document.
Parameters related to controllers
MIDI Channel .............................................................................................................
This parameter specifies the MIDI channel where MIDI messages will be transmitted when you use
a controller.
When choosing "Global," MIDI messages will be transmitted on the Global MIDI Channel in the
global parameters.
Assign Type.................................................................................................................
This parameter specifies a MIDI message to be assigned to a controller.
No Assign
No MIDI message will be transmitted.
Note C-1 to G9
A note message will be transmitted. Specify a note number.
CC#0 to 127
A control change message will be transmitted. Specify a control change number.
Prog#0 to 127
A program change message will be transmitted. Specify a program number.
Pitch Bend
A pitch bend message will be transmitted.
After Touch
A channel aftertouch message will be transmitted.
Damper
A damper message (CC#64) will be transmitted.
DAW Function
A DAW software function will be controlled.
TIP MIDI messages that can be specified vary with controllers. Please see the Parameter List.
TIP For the trigger pad only, when you press two or more keys at the settings screen, up to four
note numbers will be assigned.
10

Advertisement

   Related Manuals for Korg TRITON taktile

Comments to this Manuals

Symbols: 0
Latest comments: