Setting Door Station Address; Setting Door Station Calling Mode - CDVI CD97-4ID User Manual

PROGRAMMING INSTRUCTIONS

Setting Door Station Address

A total of 4 addresses can be configured. Addresses can be modified either before or
after installation. 0 is default, to change the setting, please follow the steps:
ID=0,1 door station
st
In standby mode, press
KEY_SET button once
Press KEY_1 button to set
the first door station.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep+
• If still in programming mode, addresses can still be changed by pressing KEY1~4 freely.
• The LED_NAME indicator will always flash while in programming mode.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To exit programming mode, press KEY_SET button four times to exit manually.

Setting Door Station Calling Mode

There are two call modes for the door station, Standard calling mode and Group calling
mode. Please note that the door station is set to Standard calling mode by default.
-8-
ID=1,2 door station
nd
Press KEY_2 button to set
the second door station.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep,Beep
ID=2,3 door station
rd
UNLOCK Indicator:OFF
TALK Indicator:OFF
Press KEY_3 button to set
the third door station.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep,Beep,Beep
ID=3,4 door station
th
Buzzer
Beep+, Beep
Press KEY_4 button to set
the fourth door station.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep,Beep,Beep,Beep