CDVI CD97-4ID User Manual page 16

SETUP INSTRUCTIONS
Adding User Cards:
Show the MASTER CARD
ADD to ID card window in
standby.
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer
Beep+, Beep
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To add a user card, access control must be set to by station, see page 15.
Deleting User Cards:
Show the MASTER CARD
DELETE to ID card window
in standby.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To add a user card, access control must be set to door station, see page 15.
Initializing Access (delete all user cards):
Show the MASTER CARD
DELETE to ID card window
in standby.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To add user card, access control must be set to door station.
• During step 3, the UNLOCK & TALK indicator will flash constantly until formatting has finished.
• When formatting is finished, UNLOCK & TALK indicator will turn off followed by a " Beep+ " , exit of setting
mode will be completed automatically.
-16-
Show user cards to be
added in sequence.
UNLOCK Indicator:OFF
TALK Indicator:Blink one time
Buzzer
Beep+
Show user cards to be
deleted in sequence.
UNLOCK Indicator:Blink one time
TALK Indicator:OFF
Buzzer
Beep+
Show the MASTER CARD
ADD to ID card window.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
Show the MASTER CARD
ADD again to exit.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep, Beep+
Show the f MASTER
CARD DELETE again to
exit.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep, Beep+
Show the MASTER CARD
ADD again, format is
activated.
UNLOCK Indicator:
Blink for some time
TALK Indicator:Blink for some time
Buzzer
Beep