SETUP INSTRUCTIONS
Setting Night View LED Illumination Mode
There are 3 working modes for the night view LED, Normally on, Normally off and Auto. Auto
is the default setting, to change this setting, please follow the steps below:
In standby mode, press
KEY_SET button three
times.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
• If still in programming mode, the calling mode can be changed by pressing KEY4 cyclically.
• The LED_NAME indicator will always flash while in programming mode.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To exit programming mode, press KEY_SET button four times to exit manually.
Setting Ring-back Tone
If the ring-back tone is set to either Once or Continuously, pressing the call button to call an
internal monitor will result in a ring-back call tone being heard at door station.
There are 3 ring-back call tones, Ring Once, Ringing Continuously and No ring-back tone.
Ring once is the default setting, to change the setting, please follow the steps below:
In standby mode, press
KEY_SET button four
times.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
• While in programming mode, ring-tone callback mode can be changed by pressing KEY1 cyclically. •
The LED_NAME indicator will always flash while in programming mode.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To exit programming mode, press KEY_SET button four times to exit manually.
-12-
Press KEY_4 button to set
the night view LED mode
to Normally on.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+
Press KEY_1 button to set
the ring-back call tone ringing
one time.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+
Press KEY_4 button again
to set the night view LED
mode to Normally off.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep, Beep
Press KEY_4
Press KEY_1 button again
to set the ring-back call tone
ringing continuously.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep
Press KEY_1
Press KEY_4 button again
and again to set the night
view LED mode to Auto.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep, Beep,Beep
Press KEY_1 button again
and again to close ring-back
call tone.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep,Beep