CDVI CD97-4ID User Manual page 15

SETUP INSTRUCTIONS
Authorising Master Add & Master Delete cards/tags:
After powering on, within 10s,
press and hold on KEY_SET
button for 3s.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep+, Beep
• The LED_NAME indicator will constantly flash until the master card authorisation mode has been exited.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• The CDV97 will exit the setting mode automatically after presentation of the Master/Delete cards/Tags, the
UNLOCK&TALK indicator will turn off.
Access Control Outputs:
The access control output can be set to either the door station (local relay) or a CDV-ACC
to allow user and access level control from an online access control system such as Atrium.
Show the master card of
MASTER CARD ADD to ID
card window in standby.
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer
Beep+, Beep
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• If current access is controlled by door station, performing the above will 'toggle' to CDV-ACC,
performing once again will 'toggle' back to the door station.
Press KEY_2 button.
UNLOCK Indicator:Blink one time
TALK Indicator:OFF
Buzzer
Beep+
Show the master card of
MASTER CARD DELETE
to ID card window.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
Show the first card to ID
card window, set the card
of MASTER CARD ADD.
UNLOCK Indicator:Blink two times
TALK Indicator:OFF
Buzzer
Beep,Beep
Show the master card of
MASTER CARD DELETE
again to switch as a door
station access control.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep+
Show the master card of
MASTER CARD DELETE
again to switch to DT-ACC
controlled.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep+,Beep
Show the second card to ID
card window, set the card of
MASTER CARD DELETE.
UNLOCK Indicator:Blink three times
TALK Indicator:OFF
Buzzer
Beep,Beep,Beep
-15-