Registering Id Card - CDVI CD97-4ID User Manual

SETUP INSTRUCTIONS
Full screen mode: When answering the call, the image will be displayed on Zoom mode for 5
seconds then switching to Full screen as a reminder to enter talking status.
'Image Switching' Off Mode: the image switching reminder will not function in any image
display mode. Activated is default, to change the setting, please follow the steps below:
In standby mode, press
KEY_SET button four
times.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
• While in programming mode the image display setting can be changed by pressing KEY3 cyclically.
• The LED_NAME indicator will always flash while in programming mode.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To exit programming mode, press KEY_SET button four times to exit manually.
Registering ID Card/Tags
• Up to 320 user cards can be registered to the door station.
• Easy management with LED status and sound hints.
• There are two master tags, one MASTER CARD ADD tag
and one MASTER CARD DELETE tag. When registering new
master cards, the old master cards are overwritten automatically.
• Card reading distance is less than 3cm.
• The master cards are necessary adding or deleting user cards.
Important: Please keep safe for future use.
• Proximity card frequency - 125kHz.
Authorising master cards:
By default, there are two master cards marked MASTER CARD ADD and MASTER CARD
DELETE, new master cards can be authorised by users at any time. This means any two user
cards can be authorised as master cards. When registered new master cards, the old master
cards will be ioverwritten automatically.
-14-
Press KEY_3 button to
activate image switching
when answering the call.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+
Press KEY_3
Press KEY_3 button again
to forbid image switching
when answering the call.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep