WIRING
Connecting Multi Monitors
Basic IN-OUT Wiring in Standard Mode
AC~
100~240VAC
PC6A
Code=1, DIP6=on
(Slave 3)
Code=1, DIP6=off
(Slave 2)
Code=1, DIP6=off
(Slave 1)
Code=1, DIP6=off
(Master)
SCU
BUS(IM) BUS(DS)
Optional functional module
SCU camera module(max.4)
GSM module(mobile phone transfer)
TPS module(PBX transfer)
QSW image quad splitter module
RF CARD
ID=0
• The door station is compatible with all
monitors within the CDVI 2Easy range.
• Please set door station to group calling
mode if there are more than 4 monitors
on the system (Refer to Page 9)
• A Distributor (CDV-DBC4A) is not
required for a full audio system, daisy
chain connection is the recommended.
wiring format.
• The last monitor connected in this
format, should set to ON.
NOTE: CDV43 Monitor shown for illustration purposes
GSM
TPS
QSW
-19-