APPENDIX
Precautions
• Clean the unit with soft cotton cloth, do not use the organic impregnate such as polishes
or chemical clean agents. If necessary, use a little pure water or diluted soap and water to
clean off dirt.
• The unit is weather resistant. However do not use high pressure water cleaners on the door
panel directly. Excessive moisture may cause problems with the unit.
• The correct power adapter supplied by the manufacturer or approved by the manufacturer
must be used.
• Warning: Internal high voltage, service by qualified personnel only.
Specification
Power supply:
Power consumption:
Camera lens:
Lock Power supply:
Number of relay circuits:
Mounting:
Working temperature:
Protection:
Material:
Wiring:
Dimension:
DC 24V
Standby 0.8W; Working 3W
Color CMOS, 2.0 Mega pixel
1/2.7'' fisheye camera,170
12Vdc, 280mA(Internal Power);
2(the second lock need external device to support)
Surface wall-mount / flush mount
-20ºC ~ +55ºC
IP54
Zinc alloy panel(surface mounted)
Stainless steel panel(flush mounted)
2 wires, non-polarity
176(H)×90(W)×27(D)mm(surface mounted)
220(H)×119(W)×52(D)mm(flush mounted)
0
wide angle
-21-