Registering Id Card - CDVI CDV97-1ID User Manual

SETUP INSTRUCTIONS
Full screen mode: When answering the call, the image will be displayed on Zoom mode for 5
seconds, then switch to Full screen as a reminder to enter the talk status.
If deactivated, no image switching reminder is displayed on any image display mode.
Activated is default, to change the setting, please use the following steps:
In standby mode, press
KEY_SET button four
times.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
• While in the setting mode, the calling code can be changed mode by pressing KEY 3 cyclically.
• The LED_NAME indicator will continually flash while in the setting mode.
• If no operation is carried out within 10 s the setting mode will exit automatically.
• To exit the setting mode manually press the KEY_SET button four times.

Registering ID Card

• A maximum of 320 user cards can be registered by the door station.
• Straight forward management with LED status and sound hints.
• There are two master cards, one MASTER CARD ADD
and one MASTER CARD DELETE. When registering new master
cards the exisiting master cards are invalidated automatically.
• Card reading distance is less than 3cm.
• The master cards are necessary when you add or delete user
cards. Please keep safe for future use.
• EM card, 125kHz.
• Cards = Tags
Authorizing master cards:
By default there are two master cards marked MASTER CARD ADD and MASTER CARD
DELETE, new master cards can be authorised by users at any time. This means any two user
cards can be authorised as master cards. When registered new master cards, the exisiting master
cards will be invalidated automatically.
-14-
Press KEY_3 button to
activate image switching
when answering the call.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+
Press KEY_3
Press KEY_3 button again to
deactivate image switching
when answering the call.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep