Setting Night View Led Illumination Mode; Setting Ring-Back Tone - CDVI CDV97-1ID User Manual

SETUP INSTRUCTIONS

Setting Night View LED Illumination Mode

There are 3 working modes for night view LED indicator, Normally on, Normally off and Auto.
Auto is default, to change the setting, please use the following steps:
In standby mode, press
KEY_SET button three
times.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
• While in the setting mode, the calling code can be changed mode by pressing KEY 4 cyclically.
• The LED_NAME indicator will continually flash while in the setting mode.
• If no operation is carried out within 10 s the setting mode will exit automatically.
• To exit the setting mode manually press the KEY_SET button four times.

Setting Ring-back Tone -

With ring-back tone set, pressing the call button to call a monitor will a result in a tone being
heard at door station.
There are 3 ring-back call tone settings, Ring Continuously, Ring Once and No ring-back
tone.
Ring continuously is the default setting, to change the setting, please use the following steps:
In standby mode, press
KEY_SET button four
times.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
• While in the setting mode, the calling code can be changed mode by pressing KEY1 cyclically.
• The LED_NAME indicator will continually flash while in the setting mode.
• If no operation is carried out within 10 s the setting mode will exit automatically.
• To exit the setting mode manually press the KEY_SET button four times.
-12-
Press KEY_4 button to set
the night view LED mode
to Normally on.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+
(Call repeat Tone)
Press KEY_1 button to set
the ring-back call tone ringing
continuously.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+
Press KEY_4 button again
to set the night view LED
mode to Normally off.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep, Beep
Press KEY_4
Press KEY_1 button again
to set the ring-back call tone
ring once.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep
Press KEY_1
Press KEY_4 button again
and again to set the night
view LED mode to Auto.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep, Beep,Beep
Press KEY_1 button again
and again to close ring-back
call tone.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep,Beep