Technical Specifications; Scope; General Technical Specifications; Determining The Technical Specifications - Siemens SIPROCESS GA700 Compact Operating Instructions

Technical specifications

10.1

Scope

The technical specifications for general use cases can be found in the operating instructions
and in the section "General technical specifications (Page 93)".
If you are using SIPROCESS GA700 devices in hazardous areas, additional or alternative
specifications apply as described in the section "Technical specifications for operation in
hazardous areas (Page 107)". These specifications may deviate from the corresponding

general technical specifications.

10.2 General technical specifications
10.2.1

Determining the technical specifications

The technical specifications are determined according to the requirements of DIN EN 61207-
1. Unless specified otherwise, the data listed below relates to the following measuring
conditions.
Table 10- 1 Measuring conditions
Technical specifications
Ambient temperature
Ambient pressure
Sample gas flow
Sample gas humidity
Site of installation
Reference gas
Reference application
The technical specifications for time and measuring response as well as for the influencing variables can sometimes
1)
differ significantly for other gas mixtures
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04
OXYMAT 7
ULTRAMAT 7
Atmospheric (approx. 1000 hPa)
0.6 l/min; Nl = Standard liter
Dew point < -40 °C
Free of vibration, shock and impact
Nitrogen (N )
2
-
CALOMAT 7
25 °C
-
Hydrogen in nitrogen (H
10
in N )
2)
2 2
93