Table of Contents
Advertisement
CVX 1800 Hardware Installation Guide
Preparing for the CVX 1800 Installation
Tools and Equipment Needed
Before you install the CVX 1800 chassis, ensure that you have all of the necessary
tools, cables, console equipment, and mounting hardware.
Tools
You must have the following tools:
•
Screwdrivers:
— Phillips #2 screwdriver
— Torque screwdriver for securing DC power cables using loop connectors
— 1/16-inch and 1/4-inch flat-tip screwdrivers
•
Nut drivers (nonmetric sizes) for securing power and ground cabling
•
Torque wrench
•
9/16-inch wrench for removing shipping bolts
•
Volt/ohm meter for power connections
Cables and Cable Ties
The shipment does not include the cables required for the telephone side of your
network. Ensure that the installation site has the proper network cabling.
Cable ties are needed to bundle network and power cables, to provide access to
LTM and RLTM modules.
2-14
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Advertisement
Table of Contents
