Tandem CVX to RAS CVX Crossover Cable
Introduction
If you need a crossover cable to send data from a tandem CVX 1800 to a RAS
CVX 1800, you must build the cable using the information in this section. Nortel
Networks does not supply this cable.
Tools and Parts Needed
To make the cable, you need the following items:
•
CAT 5-conductor cable
•
(2) RJ-45 connectors
•
RJ-45 crimp tool
Pin Data
To assemble the cable, you also need to know the pin connections. The following
table provides the tandem CVX switch to RAS CVX switch pin data:
From
Pin 1
Pin 2
Pin 4
Pin 5
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Plastic Fascia Chassis Technical Specifications
Tandem CVX to RAS CVX Crossover Cable
To
Pin 4
Pin 5
Pin 1
Pin 2
A-15