Nortel CVX 1800 Hardware Installation Manual page 105

6
7
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Install the clear protective cover, securing it with two screws tightened
to 15 in-lb.
Warning: Whether the chassis is operating on AC or DC power, you
must install the clear cover for protection against high voltage.
Connect the -48V and RTN DC power cables to the DC power source.
Note: For redundant DC power, repeat steps 2 through 5 using the other
compression terminals labeled "A -48V" and "RTN."
Chassis Connections
Connecting Power to the Chassis
3-29