Installing The External Ac Power Supply; Overview; Determining Power Distribution - Nortel CVX 1800 Hardware Installation Manual

Multi-service access switch
Table of Contents

Advertisement

CVX 1800 Hardware Installation Guide

Installing the External AC Power Supply

Installing the External AC Power Supply

Overview

The optional external AC power supply contains up to three independent 1500 W
power modules. Each 1500 W power module can power one CVX 1800. You can
configure the external AC power supply as a fully redundant, load-sharing power
system. If the primary power module fails and there is a secondary power module
in the unit, the secondary power module provides power to the CVX 1800.

Determining Power Distribution

For 1:1 nonredundant power distribution, connect two CVX 1800s to the external
AC power supply using two 1500 W power modules. For N+1 redundancy,
connect two CVX 1800s to the external AC power supply using three 1500 W
power modules.
2-24
Note: A CVX 1800 must have two or more 1500 W power modules to
support power redundancy and load sharing.
296-1011-200 Rel. 5.0, Doc. Rev. 08.01

Advertisement

Table of Contents
loading

Table of Contents