Anchor Kits - Nortel CVX 1800 Hardware Installation Manual

Anchor Kits

Nortel Networks offers four types of PTE 2000 anchor kits; each kit contains two
anchors. If you do not plan to order anchor kits from Nortel Networks, you can
use other anchor kits that provide the same level of seismic protection.
The following table describes each of the anchor kits.
Kit Number
NTRU0324
NTRU0328
NTRU0323
NTRU0326
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Note: You must use six floor anchors to secure the PTE 2000 rack to the
equipment-room floor.
Earthquake Zone
Compliance
Up to and including zone 4
Note: For zone 4
earthquake compliance,
you must use Nortel
Networks Zone 4
Mounting Flanges
each CVX 1800.
Up to and including zone 4
Note: For zone 4
earthquake compliance,
you must use Nortel
Networks Zone 4
Mounting Flanges
each CVX 1800.
Up to and including zone 2 Raised or concrete
Up to and including zone 2 Concrete floor only
Metal Fascia Chassis Installation
Mounting the CVX 1800 in a Rack
Floor Type
Raised or concrete
floor
for
Concrete floor only
for
floor
Notes
Includes M12
anchoring hardware
(2 anchors)
Includes M12
anchoring hardware
(2 anchors)
Includes 3/8 in.
anchoring hardware
(2 anchors)
Includes 3/8 in.
anchoring hardware
(2 anchors)
1-9