Nortel CVX 1800 Hardware Installation Manual page 109

Step
2
3
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Action
Insert the power cable into the receptacle labeled "Connect to CVX
1800 AC Front End Only." Insert the other end of the power cable into
the AC cable receptacle.
2. Insert the other end of the power cable
into one of the power cable receptacles.
Connect the power cords to the AC power cord receptacles on the
external AC power supply. Plug the other ends of the power cords into
a suitable power outlet.
Insert plugs into all three
AC power cord receptacles.
AC power cord
North America: 120 V at 20 A (shown)
or Europe: 240 V at 10 A
Chassis Connections
Connecting Power to the Chassis
1. Insert the power cable into the receptacle.
Be sure to insert the end with the box and loop
into the chassis connector.
Box
Loop
Power cable receptacles
Connect the AC power cord plug to a
grounded 20 A power source (100 to 240 VAC).
CVX-0074B
CVX-0075B
3-33