Connecting To Ds1 Interfaces - Nortel CVX 1800 Hardware Installation Manual

CVX 1800 Hardware Installation Guide
Connecting Network Cables

Connecting to DS1 Interfaces

The DS1-DAC-LTM provides 12 or 24 channelized T1 ports and one port for
connecting to an external clocking device.
To connect T1 cables to the T1 ports and to connect the DS1-DAC-LTM to an
external clocking device, follow this step:
Step
1
3-10
Note: The module is labeled "DS1", but the ports are T1 ports.
Action
Plug the RJ-48C connectors into the receptacles.
12 DS1 ports
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
24 DS1 ports
Connect to
the telephone
network.
Connect to
the external
clocking device
(if used).
CVX-0057B