Applying Power to the CVX 1800
Procedure
To apply power to the CVX 1800, follow these steps:
Step
1
2
3
4
5
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Action
Ensure that you have connected all power cables to the appropriate
terminals.
Ensure that you have installed the clear protective cover over the
power cable terminals.
Ensure that you have inserted the flash memory card in the left
PCMCIA slot (C: drive) on the SCC.
Apply power from the power source.
If the CVX 1800 is connected to an external AC power supply, turn on
the DC output power switch.
Chassis Connections
Applying Power to the CVX 1800
3-51