Diagnostic Information Access - Baldor 23H Series Installation & Operating Manual

Section 1
General Information
Display Mode Continued

Diagnostic Information Access

Action
Press DISP key
Press ENTER key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
MN723
Description
Scroll to Diagnostic Information
screen
Access diagnostic information.
Display mode showing control
temperature.
Display mode showing bus
voltage.
Display mode showing %
overload current remaining.
Display mode showing opto
inputs & outputs states.
(0=Open, 1=Closed.)
Display mode showing actual time
the drive has been powered up.
Display mode showing operating
zone, voltage and control type.
Display mode showing continuous
amps; PK amps rating; amps/volt
scale of feedback, power base ID.
Display mode showing which
Group1 or 2 expansion boards
are installed and recognized.
Display mode showing position
counter contents.
Display mode showing parameter
table selected.
Display mode showing software
version and revision installed in
the control.
Displays exit choice.
Display
Diagnostic Access screen.
First Diagnostic Information
screen.
XXXV
Opto Inputs states (Left);
Opto Outputs states (Right).
HR.MIN.SEC format.
Typical display.
In this case, no expansion boards
are installed.
Press ENTER to exit diagnostic
information.
Programming & Operation 4-3
Comments