Program Chart; Mop Programs - Miele PW 811 Operating And Installation Instructions

Program chart

These programs are suitable for washing, disinfection and conditioning (at different hu-
midity levels) of mops of cotton, blended or microfiber fabric, door mats, polishing pads
and cleaning cloths used in facility management.
To avoid recontamination, in the disinfection program the water for the rinse cycles is not
supplied via the detergent dispenser.

Mop programs

Avoids coarse soiling in the machine.
Shake the mops out before putting them into the machine.

Mops standard
Type of fabric
Program se-
quence
Mops standard
+ finish
Type of fabric
Program se-
quence
Mops th. disinfection
Type of fabric
Program se-
quence
140 °F / 194 °F - 60 °C / 90 °C
Cotton and mixed fiber, viscose, polyester and
microfiber mops
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Main wash 140 °F/203 °F - 60 °C/ 90 °C, Cool
down can be activated
2 rinses
Final spin
140 °F / 194 °F - 60 °C / 90 °C
Cotton and mixed fiber, viscose, polyester and
microfiber mops
Program sequence as for Mops standard,
then: Finishing agent, damp
or activate block:
Damp, wet, dripping wet
194 °F / 90 °C
Cotton and mixed fiber, viscose, polyester and
microfiber mops
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Disinfection 194 °F / 90 °C, 10 min., Cool down
can be activated
3 rinses
Final spin
Program chart
Fill ratio/Load
size
1:10
PW 811 - 25 lb
(11 kg)
PW 814 - 30 lb
(14 kg)
PW 818 - 40 lb
(18 kg)
No. pieces
See chart
"Mop load size"
87