Mask Programs - Miele PW 811 Operating And Installation Instructions

Mask programs

Masks are programs for washing and disinfecting breathing masks with head straps.
Put the head bands over the masks to protect the visors before loading the machine.

Put each mask into its own protective bag and fasten it.

Remove the masks from the bags after processing.

Spin damp, empty bags using the Spin bags program.

Masks
Load
Program se-
quence
Masks with pre-wash
Load
Program se-
quence
Spin bags
Load
Program se-
quence
* The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time and dosages) must
be set on site to suit cleaning agents and disinfectants.
To avoid recontamination, in the disinfection program the water for the rinse cycles is not
supplied via the detergent dispenser.
Do not wash masks with connections for helmet-mask combinations.
The clasps are likely to scratch visors.
Use a suitable detergent. Follow the manufacturer's instructions.
140 °F / 60 °C
Face masks with head straps
Disinfection* 140 °F / 60 °C, 20 min.
4 rinses
140 °F / 60 °C
For heavily soiled masks with head straps
Pre-cleaning 86 °F / 30 °C
Disinfection* 140 °F 60 °C, 20 min.
4 rinses
Face mask bags
Spin
Program chart
Fill ratio/Load
size
PW 811 -
10 masks
PW 814 -
13 masks
PW 818 -
15 masks
1:20
95