Program Chart - Disinfection - Miele PW 811 Operating And Installation Instructions

Program chart

Program chart - Disinfection

All programs are locked. After 1 minute into a program the program can no longer be
aborted, stopped or parts skipped.
To avoid recontamination, in the disinfection program the water for the rinse cycles is not
supplied via the detergent dispenser.
Thermal disinfection
Type of fabric
Program se-
quence
Thermal disinfection RKI* 194 °F / 90 °C
Type of fabric
Program se-
quence
Chemo-thermal
disinfection
Type of fabric
Program se-
quence
Chemo-thermal disinfec-
tion RKI*
Type of fabric
Program se-
quence
RKI = (Robert Koch Institute)
** The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time, and dosages) must
be set on site to suit cleaning agents and disinfectants.
82
194 °F / 90 °C
Cotton, linen e.g. bed linen, toweling
+ Pre-wash 103 °F / 40 °C, optional
Disinfection 194 °F / 90 °C, 10 min., Cooldown
can be activated
2 rinses
Final rinse
Cotton, linen e.g. bed linen, toweling
Disinfection 194 °F / 90 °C, 10 min., Cooldown
can be activated
2 rinses
Final rinse
140 °F / 60 °C
Cotton, linen e.g. bed linen, toweling
+ Pre-wash 103 °F / 40 °C, optional
Disinfection 140 °F / 60 °C, 20 min.,
2 rinses
Final rinse
140 °F / 60 °C
Cotton, linen e.g. bed linen, toweling
Disinfection 103 °F / 40 °C**, 20 min.
2 rinses
Final spin
Fill ratio/Load
size
1:10
PW 811 - 25 lb
(11 kg)
PW 814 - 30 lb
(14 kg)
PW 818 - 40 lb
(18 kg)