Setting Data - Miele PW 811 Operating And Installation Instructions

Setting data

The following will then appear in the display during data transmission:
Data to card  Dispensing
If there was already dispensing data on the card the security ques-
tion will appear.
Data to card  Dispensing
Overwrite existing data?
Press the  "Save" button to overwrite the existing data.
Tip: When the  button is pressed, or if after 30 seconds no button
has been pressed, overwriting is not carried out and the display re-
turns to the main menu.
With this menu option all settings from the Supervisor level (see "Set-
tings" menu option) can be copied from the controls onto a card.
However existing settings will only be overwritten following addi-
tional confirmation.
Call up the "Settings" display in the "Data to card" menu option.

Main menu  Data to card
Dispensing
Settings
Select "settings" and press the "START" button.

Then the display will change to the following:
Data to card  Settings
If there was already settings data on the card, the security question
will appear.
Data to card  Settings
Overwrite existing data?
Press the  "Save" button to overwrite the existing data.




Programming







163