Dispensing Type - Miele PW 811 Operating And Installation Instructions

11. Dispensing
type
The assignment of valves to detergent dispensers is as follows:
Pre-wash compartments
Main wash compartments
Fabric softener compartments
Special application compartments
Direct water intake
WR inlet valve
The following valves are activated depending on program blocks:
Program structure
Pre-wash 1
Pre-wash 2-10
Main wash 1
Main wash 1-10 (with pre-
wash)
Rinse 1
Rinse 1
Rinse 2
Rinse 1
Rinse 2
Rinse 3
Rinse 1
Rinse 2
Rinse 3-9
Rinse 10
– User-defined
– No
– 4 of 10 different water valves
Determines how the detergent is dispensed into the machine.
Choose from the following options:

– No
No dispensing
– Amount ml (milliliter)
– Concentration m/l (Ml per liter)
Does not appear if Fill type is programmed to "Water height" or
"Auto load adjustment" in program header.
– Concentration ml/kg (Milliliter per wash load in kg)
Temperature range
Actual temp. >Tar- Actual temp. =Tar-
get.
KD, K1 WD, W1, KD, K1
KD, K1 WD, KD, K1
KD, K2 WD, W2, KD, K2
KD, K2 KD, WD, W2, K2
KD, K3 KD, WD, K3
KD,K4 KD,WD,K4
KD, K3 KD, WD, K3
KD KD, WD
KD,K4 KD,WD,K4
KD, K3 KD, WD, K3
KD KD, WD
KD,K4 KD,WD,K4
KD KD, WD
KD,K3 KD,WD, K3
Programming
Valves
K1, W1
K2, W2
K3
K4
KD, WD
K6
Actual temp. <Tar-
get. get.
WD, W1, KD, K1
WD, W1
WD, W2, KD, K2
WD, W2
WD, K3
WD,K4
WD, K3
WD
WD,K4
WD, K3
WD
WD,K4
WD
WD,K3
139