Program Name; Material Number; Area 1 - 2 - 3 - Miele PW 811 Operating And Installation Instructions

Program name

Material number

Area 1 - 2 - 3

Select the Program name menu option.

When this is selected, the display will show the following:
Supervisor level  Program header
Program name :
Part number : xxxxxxxxx
 
Jump to the "Progr. Name" input field.

Select a character and press the multifunction selector.

The selected character will appear in the "name" field.
Program name : _ _ _ _ _ _ _
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789
Use the a->A function button to toggle between upper and lower
case
Use the  function button to delete a character and one field to the
left.
Selecting the Material number input field.
Turn the multifunction selector to the right.

Material number can only be read and not changed. For programs
newly created by the Supervisor xxxxxxxxx will appear here.
Select input field Area 1
Turn the multifunction selector to the right.

Create  Program header
Area 1 : No
Area 2 : No
 
You have the following options:
– No
– 1 block to 10 blocks
If a block number is configured, then an area name must also be en-
tered. This can be given under "Name Area 1" First suggestion for
Area 1 "Pre-wash", for Area 2 "Main wash" and for Area 3 "Rinse".
See "Program structure for more information.

a -> A



Programming







129