Miele PW 811 Operating And Installation Instructions page 27

Washing without detergent compartment
Dispensing calibration  Dispensing pump 1
V: 100 ml t:
Tip: The dispensing amount can be set from 0 to 9999 ml in 1 ml
steps.
Press multifunction button 0/1

The dispensing tube will fill up.
Press the 0/1 button to stop the process.

Place the hose of the dispenser pump which is being checked at an

upward gradient in a measuring vessel.
 Irritant detergents.
Irritant for skin and eyes
Avoid contact with skin and eyes, wear protective clothing.
Return to the main menu by pressing  "Back".

Dispensing calibration
Dispensing pump 1
Dispensing pump 2
Select a dispenser pump.

Dispensing calibration  Dispensing pump 1
V: 100 ml t:
Press multifunction button 0/1 .

Stop the pump by pressing the 0/1 button, or it will stop automatically
after 60 seconds.
Measure the amount of liquid dispensed into the measuring vessel.

Dispensing calibration  Dispensing pump 1
V: 100 ml t:
Enter the measured value into the "V:" field.

The throughput P is calculated in ml/min. by the controls.
Press the  "Save" button.

The measured value is allocated to the pump.
Reconnect the hose.

0s P:
0/1

Main menu

0 s P: No
0/1

30 s P: 200 ml/min
0/1

No





27