Miele PW 811 Operating And Installation Instructions page 151

Display Stand by
Contrast setting
Button allocation
Time of day
1 Cottons Hygiene
Rinse
Rinse 1
+ 

1 Cottons Hygiene
Rinse 2
+ 

Options:
– Normal
– Detail
In the setting "Display standby: Yes", the display is switched on by
operating one of the controls. If the controls are not touched again,
after 10 minutes it goes into standby. The start button light ring
flashes to let you know this has happened. It is switched on again
by operating any control and the last active screen will appear.
In the "Display Stand by: No" setting the display is permanently
switched on.
Select from the following options:

– Yes
– No
Display contrast can be altered from 1 to 10 to allow the display to
be optimized for specific working conditions. When the setting is al-
tered, the contrast is changed immediately.
Options:
– 1 to 10
When "Direct" is set the first 6 programs on the program list are allo-
cated to the function buttons 1 to 6.
Confirm with the multifunction selector.

Select from the following options:

– Normal
– Direct
First select either a 24 hour or 12 hour clock.
Options:
– 24 h
– 12 h
14,0/14,0 kg

1075 rpm



14,0/14,0 kg
1075 rpm



Programming
151