Seat Mii 2013 Owner's Manual page 260

258 Practical information
Complete operations only in the sequence given:
⇒ f ig. 145
Dipped beam and main beam headlights
Insert the bulb, return it to its position and
6.
Place the rubber cover and check that is
7. correctly in position. Insert the connector
Note
The images show the left hand headlight from behind. The structure of the
right hand side headlight is symmetric.
Replacing the front bumper bulbs
A
Insert the bulb holder in the headlight and
insert the retaining clip .
D
to the bulb H4.
Fig. 146 In the front
right wheel arch: Remove
the retaining screws (ar-
rows) and take out the
expansive rivet .
A
B
Side light and daytime driving light
turn it clockwise as far as the stop.

Complete operations only in the sequence given:
Always take the checklist into account and take the necessary ac-
1.
tions ⇒ p age 256.
Unscrew the 2 retaining screws of the wheel arch trim
2.
(arrows) with the screwdriver from the vehicle took kit ⇒ p age 237.
Unscrew the expansive rivet in the lower front part of the wheel arch
⇒ f ig. 146
3. trim with the screwdriver from the vehicle tool kit and
A
completely remove it ⇒ p age 237.
4. Carefully fold the wheel arch trim to the side.
5. Release the connector
C
Turn signals (front)
Insert the bulb holder in the headlight and
turn it clockwise as far as the stop.
Fig. 147 Changing the
bulbs in the headlights.
⇒ f ig. 146
⇒ f ig. 147
and remove it.
1
