182
In the engine compartment
Checking the engine coolant level and refilling
If the coolant level is low, the coolant warning indicator will light.
Preparations
● Park the vehicle on even, flat and firm ground.
● Allow the engine to cool ⇒
● Open the bonnet ⇒ p age 171.
● The coolant expansion tank is easily recognisable because of the sym-
bol on the cap
Checking the engine coolant level
● When the engine is cold, check the coolant level using the side marking
on the expansion tank
● If the level is below the "MIN" mark, top up with coolant. When the en-
gine is hot it may be slightly above the marked area.
Fig. 108 In the engine
compartment: Marking
Topping up the engine coolant level
on coolant expansion
● Always protect your face, hands and arms from hot coolant and steam
tank.
using a large, thick cloth over the coolant expansion tank cap.
● Remove the cap very carefully ⇒
● Only refill using new engine coolant according to SEAT specifications
(⇒ p age 181) ⇒ .
● The engine coolant level should be between the marks on the coolant
expansion tank
⇒ .
● Screw on the cap tightly.
● If, the event of an emergency, you have no coolant that is compliant to
the required specifications (⇒ p age 181), never use another type of addi-
tive. Instead, first top up with distilled water ⇒
the correct proportion of the mixture with the correct additive as soon as
Fig. 109 In the engine
possible ⇒ p age 181.
compartment: Coolant
expansion tank cap.
.
⇒ f ig.
109.
⇒ f ig.
108.
.
⇒ f ig.
108. Do not exceed the top level of the marked area
only. Then re-establish