Seat Mii 2013 Owner's Manual page 259

Replacing the bulbs in the headlights
There is no need to remove the headlight to replace bulbs.
Complete operations only in the sequence given:
⇒ f ig. 145
Dipped beam and main beam headlights
1.
2.
Remove the bulb connector H4. Remove
the rubber cover using the tabs.
3.
Press the retaining clip
the direction of the arrow, and unclip side-
4.
5.
Vehicle diagram Prior to a journey...
A
Side light and daytime driving light
Always take the checklist into account and take the necessary actions ⇒ p age 256.
Open the bonnet  ⇒ p age 171.
Turn the bulb holder in an anti-clockwise direction as far as it will go and remove it, along
downwards in
D
ways and remove it.
Remove the bulb from the holder. If necessary, press the lock on the bulb holder.
Replace the faulty bulb by a new identical bulb.
While driving
Fig. 145 In the engine compartment: Rear view of the
front left headlight with rubber cover:
and main beam headlights,
driving lights and
B
with the bulb, pulling backwards.
Care, cleaning and mainte- If and when
nance
Practical information 257
dipped beam
A
side lights and daytime
B
turn signal.
C
C
Turn signals (front)

Technical Data