Seat Mii 2013 Owner's Manual page 250

248 Practical information
WARNING (Continued)
● Avoid heavy acceleration, hard braking and fast cornering.
● Drive only during 10 minutes at a maximum speed of 80 km/h
(50 mph) and subsequently check the tyre.
For the sake of the environment
Dispose of used or expired sealant observing any legal requirements.
Note
A new bottle of sealant can be purchased at SEAT dealerships.
Note
Take into account the separate instruction manual of the tire mobility set
manufacturer*.
1)
A compressor may also be included.
2)
In its place, the compressor may have a button.
Components of the tire mobility set*

The tire mobility set is located underneath the floor covering in the luggage
compartment. It includes the following components
Tyre valve remover
1
Sticker indicating maximum speed "max. 80 km/h" or "max. 50mph"
2
Filler tube with cap
3
Air compressor
4
Tube for inflating tyres
5
Warning provided by tyre pressure monitoring system
6
2)
Air bleed screw
7
ON/OFF switch
8
12 volt connector
9
Fig. 141 Standard repre-
sentation: Contents of
the tire mobility set.
⇒ f ig.
141:
1)
