Seat Mii 2013 Owner's Manual page 274

272 Description of specifications
Vehicle identification data
Vehicle identification number
The vehicle identification number (chassis number) can be read from out-
side the vehicle through a viewer in the windscreen
is located in the lower part of the windscreen. The vehicle identification
number (chassis number) is also stamped on the right water drain channel.
The water drain channel is located between the suspension tower and the
wing. Open the bonnet to read the vehicle identification number .
Vehicle data plate
The vehicle data label
contains the following data:
Vehicle identification number (chassis number)
1
Vehicle type, engine power, gearbox type
2
Engine and gearbox code, paint number, interior equipment. In the ex-
3
ample, the engine has the code "CBFA"
Fig. 158 TO: Vehicle da-
Optional extras, PR numbers
4
ta label: in the example,
engine with code CBFA
These data are also provided in the Maintenance Programme.
. B: Identification
3
plate.
Specific vehicle weight information
The instructions in the official vehicle documents take precedence. All the
technical data provided in this documentation is applicable to the basic
model. The vehicle data label in the Maintenance Programme or the vehicle
documents show which engine is installed in your vehicle.
The figures may be different depending on if additional equipment is fitted,
for different models and for special vehicles.
Kerb weight values shown in the following table apple for a vehicle with
driver (75 kg), liquids including a fuel tank 90% full, in addition to tools and
a spare wheel ⇒
Fig. 159 Vehicle identifi-
equipment and retrofitting of accessories, while proportionally reducing car-
cation number.
rying capacity.
The load is equivalent to the following weights:
⇒ f ig.
159. This viewer
⇒ f ig. 158
is at the front of the spare wheel well. It
⇒ f ig.
158.
. The kerb weight indicated increases with optional

