Seat Mii 2013 Owner's Manual page 90

88 Lights and visibility
Headlight range control, lighting of instruments and
controls
Headlamp height adjustment
⇒ f ig. 57
The headlight range control
the headlight beam and the vehicle load status. This offers the driver opti-
mum visibility and the headlights do not dazzle oncoming drivers ⇒
The headlights can only be adjusted when the dipped beam is switched on.
⇒ f ig.
To reset, turn switch 57:
Value Vehicle load status
– Two front occupants, luggage compartment empty
1 All seats occupied, luggage compartment empty
2 All seats occupied, luggage compartment full.
3 Driver only, luggage compartment full.
a)
If the vehicle load does not correspond to those shown in the table, it is possible to select
intermediary positions.
Fig. 57 Next to the
steering wheel: Head-
light range control.
is modified according to the value of
.
a)
Instrument and switch lighting
When the side lights or dipped beam headlights are switched on, the light-
ing for instruments and controls lights up at a constant brightness.
WARNING
Heavy objects in the vehicle may mean that the headlights dazzle and
distract other drivers. This could result in serious accident.
● Adjust the light beam to the vehicle load status so that it does not
blind other drivers.
Reading light
Button / Function
Switch

Switching off the reading light.

Switching on the reading light.
Switches door contact control on (central position).
The reading light comes on automatically when the vehicle is un-

locked, a door is opened or the key is removed from the ignition.
The light goes off a few seconds after all the doors are closed,
the vehicle is locked or the ignition is switched on.
Note
The reading lights go out when the vehicle is locked, or a few minutes after
the key is removed from the ignition. This prevents the battery from dis-
charging.

