34
Unlocking and locking
Function
Necessary operations
Lock the vehicle, by
– Turn off the ignition and turn it on again.
pushing the central
– Push the central locking button
locking button:
Use the key to lock the
– Turn off the ignition and turn it on again.
vehicle:
OR: Remove the key from the ignition.
– Open any door just once.
– Lock the vehicle with the key.
Note
If the buttons of the vehicle key are pressed ⇒ p age 28 or one of the central
⇒ f ig. 19
locking buttons
is pressed repeatedly in short succession, the cen-
tral locking briefly disconnects as protection against overloading. In this
case, the vehicle remains unlocked for about. 30 seconds. If no doors or the
rear lid are opened during this time, the vehicle will subsequently become
locked automatically.
Locking and unlocking the vehicle from the exterior
.
Central locking
Function
Unlocking the
vehicle.
Locking the ve-
hicle.
Fig. 17 Buttons on the
vehicle key.
Fig. 18 Vehicle mechani-
cal key:
Handling the buttons
Handling the vehicle key
⇒ f ig. 17
on the vehicle
in the lock cylinder or
⇒ f ig. 17
with the vehicle mechanical key
⇒ f ig.
18.
Press button
.
Insert the vehicle key into the
lock cylinder of the driver door
and turn the key in an anti-clock-
wise direction.
Press button
.
Insert the vehicle key into the
lock cylinder of the driver door
and turn the key in a clockwise
direction.