Seat Mii 2013 Owner's Manual page 264

262 Practical information
Only carry out the operations in the sequence indicated:
Always take the checklist into account and take the necessary ac-
1.
tions ⇒ p age 256.
With one hand, press on the number plate light from left to right
2.
and remove it from the bumper
3. Detach the number plate light carefully from the bumper.
Turn the bulb holder with the bulb anti-clockwise and remove it in
4.
the direction of the arrow
5. Replace the faulty bulb by a new identical bulb.
Place the bulb holder in the number plate light and press in the op-
6.
posite direction to the arrow as far as possible
Insert the number plate light carefully into the left edge of the open-
ing on the bumper. During this process, check that the assembly di-
7.
rection of the number plate light is correct, i.e. the spring must be
on the right.
Insert the number plate light into the bumper until it audibly clicks
8.
into place.
⇒ f ig.
150.
⇒ f ig.
151.
⇒ f ig.
151.
Changing the side turn signal bulb

Fig. 152 Removing the
side turn signal.
Fig. 153 Side turn sig-
nal: Changing the bulbs.
