Seat Mii 2013 Owner's Manual page 149

Cruise control system operation
Control position, control
Function
operations
Switching on the
Control
B
cruise control sys-
.
tem.
Switching on the
Press button
cruise control sys-
area .
tem.
Temporarily Place control
switching off the sition .
cruise control sys- OR:. Press the brake or
tem. clutch pedal.
Switching the
Press button
speed setting
area .
back on.
Vehicle diagram Prior to a journey...
Fig. 91 Turn signal and
main beam headlights
lever on the left of the
steering column: CCS
buttons and controls.
Action
⇒ f ig. 91
The system is switched on.
After switching on, no
in the position
speeds are stored and no
regulator has yet been
placed.
in the The current speed is stor-
A
ed and maintained.
in the po- The cruise control system
B
is switched off temporari-
ly. The speed setting will
remain stored.
The stored speed is
in the
A
reached again and main-
tained.
While driving
Control position, control
Function
⇒ f ig. 91
operations
Press the button
area  briefly to in-
crease speed in shot
measures of about. 1 km/
Increasing the
h (1 mph) and store.
stored speed (dur-
Keep button pressed in
A
ing CCS setting).
the area  for a long
time to continually in-
crease speed until releas-
ing and storing.
Press the button
area  briefly to reduce
the stored speed in shot
measures of about. 1 km/
Reducing the stor-
h (1 mph) and store.
ed speed (during
Keep button pressed in
A
CCS setting).
the area  for a long
time to continually de-
crease stored speed until
releasing and storing.
Switching off the
Control in the position
B
cruise control sys-
.
tem.
Travelling down hills with the CCS
When travelling down hills the CCS cannot maintain a constant speed. Slow
the vehicle down using the brake pedal and reduce gears if required.
Automatic off
The cruise control system (CCS) is switched off automatically or temporarily:
Care, cleaning and mainte- If and when
nance
Driver assistance systems
Action
in the
A
The vehicle accelerates ac-
tively until it reaches the
new stored speed.
in the
A
Reduce speed without
braking, by interrupting
the accelerator until reach-
ing the new stored speed.
The system is switched off.
The stored speed is de-
leted.

Technical Data
147