Seat Mii 2013 Owner's Manual page 55

Removing and installing the rear head restraints
The rear seats are equipped with a head restraint.
Removing the rear head restraint.
● Unlock the rear seat bench backrest and fold it forward ⇒ p age 100.
● Push the head restraint up as far as it will go ⇒
● Pull the head restraint out of the fitting without releasing the button
⇒ f ig. 32
.
1
● Fold the backrest of the rear seat bench backwards until it is engaged.
● Safely store the removed head restraints.
Removing the rear head restraint.
● Unlock the rear seat bench backrest and fold it forward ⇒ p age 100.
● Correctly insert the head restraint into the guides on the backrest.
● Push the head restraint down as far as it will go while pressing button
.
1
● Fold the backrest of the rear seat bench backwards until it is engaged.
● Adjust the head restraint to the correct position ⇒ p age 52.
Vehicle diagram Prior to a journey...
WARNING
Travelling with the head restraints removed or improperly adjusted in-
creases the risk of severe or fatal injuries in the event of accidents and
sudden braking or manoeuvres.
● Always fit and adjust the head restraint properly whenever a person
is occupying a seat.
● Refit any removed head restraints immediately so that passengers
are properly protected.
CAUTION
On removing and fitting the head restraint, make sure the head restraint
does not hit the interior roof of the vehicle or the backrest of the front seat.
This could damage the interior roof and other parts of the vehicle.
Fig. 32 Removing the
rear head restraint.
Adjusting the steering wheel position
.
While driving Care, cleaning and mainte-
nance
Ensuring you are correctly and safely seated
Fig. 33 Mechanical
steering wheel adjust-
ment.
If and when Technical Data
53

