Seat Mii 2013 Owner's Manual page 87

CAUTION
Failure to heed the warning lamps when they appear may result in faults in
the vehicle.
Turn signal and main beam lever
Move the lever to the required position:
Right turn signal.
1
Left turn signal.
2
Switching on main beam ⇒
3
the warning lamp  is switched on in the instrument panel.
Switch on the flasher or switch off the main beam headlights. The flash-
4
ed beam comes on if the lever is pressed. The warning lamp  will
light up during this process.
Vehicle diagram Prior to a journey...
Fig. 55 Turn signal and
main beam lever in their
initial position.
. When the main beam is switched on,
While driving
Push the lever all the way down to turn off the corresponding function.
Convenience turn signals
For the convenience turn signals, move the lever as far as possible upwards

or downwards and release the lever. The turn signal will flash 3 times.
The convenience indicators can be deactivated at a Specialised workshop.
WARNING
Incorrect use of the headlamps may cause accidents and serious injury,
as the main beam may distract or dazzle other drivers.
Note
The turn signal only works when the ignition is switched on. The hazard
warning lights system also works when the ignition is switched off
⇒ p age 231.
Note
If any of both turn signals fails, the warning lamp will start flashing twice
faster than normal.
Note
The main beam headlights can only be switched on if the dipped beam
headlights are already on.
Care, cleaning and mainte- If and when
nance
Lights and visibility 85

Technical Data